EN
Unilateral Hip Abduction Orthosis / Hip ROM Brace
The HA002 Hip Abduction Orthosis delivers post-operative hip protection without sacrificing rehabilitation progress.
Its clinician-adjustable ROM dial hinge sets precise flexion, extension, and abduction limits — safeguarding against prosthetic dislocation after total hip replacement while permitting the early weight-bearing and gait training essential to recovery.
A multi-pulley cord-lacing system tightens the entire pelvic band evenly with a single pull, enabling seated, one-handed donning by patients with limited mobility.
Available in dedicated left and right configurations with built-in S–2XL sizing marks.
- Overview
- Recommended Products
- Post total hip replacement (THR/THA) — dislocation prevention
- Hip revision surgery — extended protection protocol
- Acetabular fracture — conservative or post-fixation management
- Recurrent hip dislocation / chronic hip instability
- Post-operative soft tissue repair around the hip joint
-
Neuromuscular hip subluxation requiring abduction control
Component Detail Item No. HA002-MEP/L (Left) / HA002-MEP/R (Right) Sizing Built-in graduated marks: S / M / L / XL / 2XL / Universal Tightening Cord-lacing system — H129-DR PA housing (×2) + H160-DR POM pulleys (×8) + H21 POM anchors (×8); PVC composite pull handle Hip Hinge Adjustable ROM dial hinge (MT016101, electrocoat black) + oval cast-zinc connector (MT016201) + graduated dial decal (SK001304) Thigh Upright Aluminum M-type connector (MT016301, electrocoat black) + PP long-strip thigh frame (PL019001) Shell Components PP hip joint upper/lower plates (PL018801 / PL019001); oval & semicircular PP reinforcement Cushioning 45° hardness TPR hip pad (PL019101); 0.3cm high-density foam bonded with napped fabric + 165g sandwich mesh Fabric 195g SJ241 black sandwich mesh (16.5×17.5 / 22.5×17.5cm); 165g SJ241-2A sandwich mesh (multiple panels up to 18.5×71cm) Hardware 304 stainless hex socket screws M6×14 / M6×8; stainless washers 5×10×0.8mm; black electroplated rivets Included Tools T-handle hex wrench (4×105mm) + 7-shaped hex wrench (M2.5×120mm) — for clinician ROM adjustment Packaging PE self-seal bag 46×(70+2)×7C; dedicated L/R cartons 57×36×42cm; damp-proof beads
