EN
Humeral Fracture Brace / Sarmiento Brace
The SL010-MEP Humeral Fracture Brace applies the clinically established Sarmiento functional bracing principle to humeral shaft fractures.
Its two-piece clamshell PE structure delivers circumferential soft-tissue compression that stabilizes the fracture site hydraulically, while permitting early active motion of the shoulder and elbow — the key to preventing post-immobilization joint stiffness.
An integrated shoulder cap extends coverage to the proximal humerus, and a three-point suspension system (neck sling, shoulder strap, and wrist cuff) distributes limb weight comfortably across the shoulder girdle.
Designed for the 6-to-12-week wear cycle that humeral fractures demand.
- Overview
- Recommended Products
- Humeral shaft fractures (mid-shaft, functional bracing protocol)
- Proximal humerus fractures — conservative management
- Greater tuberosity fractures
- Post-operative humeral fixation support
- Humeral non-union / delayed union supplementary bracing
- Post-cast transition immobilization
【Clinical Indications 】
| Component | Detail |
|---|---|
| Item No. | SL010 |
| Sizing | Universal (adjustable circumference via straps) |
| Main Shell | 0.3cm natural-white PE board bonded with 0.3cm white IXPE — large panel 20×33.3cm + small panel 15×21.7cm (thermoformed) |
| Reinforcement Panels | 1.5mm milk-white PE board (9×16.7cm); 2mm white PE board (6.2×15.6cm) |
| Cushion Layers | 3mm white IXPE single-side adhesive-bonded; 6mm white IXPE (HK1037) |
| Inner Sleeve | White A08# ribbed cotton knit sleeve, 26cm width × 75cm — removable & washable |
| Straps | 3.8cm white cotton webbing (132cm); 5.2cm white nylon napped binding tape (64cm / 125cm) |
| Hardware | 3.8cm silver-plated core-pull buckle; PP square buckle (KN2501-25); silver double-cap rivets 10×10mm |
| Certification | CE compliance woven label (LB011505, Universal) |
| Packaging | Perforated PE self-seal bag 25×(45+2)×5C; Carton 57×36×42cm; damp-proof beads included |
